There must be at least 50cm from the obstacles to the air outlet which is on the top of the chiller and should leave at least 30cm between obstacles and the air inlets which are on the side casing of the chiller.
Explore MoreMake sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant. Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Explore MoreMake sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant. Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Explore MoreMake sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant. Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Explore MoreChiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector. The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again.
Explore MoreMake sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant. Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Explore MoreMake sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant. Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Explore MoreMake sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant. Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Explore MoreMake sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant. Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Explore MoreMake sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant. Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Explore MoreYour equipment saves lives. Partner with us — we deliver safely, on time, every time.
Timing: 11:00 AM to 11:59 PM
Copyrights © 2026 GLAVIK. All Rights Reserved.
Developed by Anifar Technologies