80W Laser Module Laser Head Engraver For CNC Laser Engraver Cutting Machine
ls 1. Can Cut: MDF/ Balsa/ Paper/ Wood/ Fabric/ Plastic/ Leather/ Plywood/ Foam Paper.Unable to Engrave: blue/purple/white/transparent material, aluminum without oxide layer. 2. FAC technology: FAC technology means the laser power is more centralized, the engraving/cutting/marking is more accurate.20,000 hours life time! The engraving speed increase 4~5 times accordingly. At same time, the precision increase 4~5 times also. 3. It is suitable for Laser Engraver machine, Laser Cutter, 3D printer, CNC millling, and so on. 4.Directly engrave mirror stainless steel: no need painting black; Super fast engraving speed: 304 stainless steel, up to 500mm/s ; cutting through 8mm thickness plywood by one pass at speed of 1.5mm/s. 5. Use the upgraded magnetic laser protective cover, which is more convenient to install and accurately protect the eyes,can effectively reduce the damage of the laser to the eyes, and is safe and beautiful. 6.Equipped with 3P, 2P+2P plugs for PWM/TTL control, suitable for Z-axis diameter 52mm CNC router, compatible with most 3D gantry printers and laser engraving machines on the market such as Ender 3, SV series. [Original diode] Original diode, high quality,20,000 hours lifetime! [Easy to use] Wavelength: 450nm, Input: DC 12V 3.2A ,Support 5V PWM modulation, Input port: XH2.54-3P socket ,control line installation method: pluggable.Suitable for DIY engraving machine. [Applicable materials] Ceramics,Bone,MDF,Coated glass,Black acrylic,Plywood,Brushed stainless steel, Stone, Bamboo, Leather, Rubber,Alumina,Solid wood, etc. [Precautions] Unable to engrave: blue/purple/white/transparent material, aluminum without oxide layer. High power laser head:professional laser head with high speed and high stability. Blue laser module:bright blue light, easy to position when engraving. Effect output power:5.5W/10W Light spot form:Dotted Size:40*40mm(1.57*1.57″) Focus Size：0.08*0.08mm Fixed focus laser head:suitable for 3-axis engraving machine, easy to install Easy to assemble:small size, compact structure, easy to install. 80W engravable materials:Wood, paper, leather, bamboo, plastic, rubber, aluminum oxide, stainless steel, copper, etc. Cuttable Material:cardboard,non-woven fabric, veneer, acrylic, some thin plastic board. Compatibility:Laser with3P,4P (2P + 2P)two kinds of control line for wider applicability Compatible with 95% of the laser engraving machines on the market.including Atomstack, artur, Neje, twotree, etc. Laser Module： 80W Laser Wavelength: 445nm (blue viole) Laser Power: 80W Optical Power Output：10W Drive mode: External ACC constant current drive Cooling Method: Forced air cooling Operating Voltage: 12V DC Shell Material: Aluminum,Surface Anodized Module Material: Copper Life Time:8,000 hours Working Temperature:-40-75Celsius Focal Length: 40W-23mm; 80W-50mm Laser Module： 40W Plywood 2mm cut : 300mm/min , S1000 , 1 Pass Plywood 3mm cut : 250mm/min , S1000 , 1 Pass Plywood 4mm cut : 200mm/min , S1000 , 1 Pass Plywood 5mm cut : 100mm/min , S1000 , 1 Pass Plywood 5mm cut : 200mm/min , S1000 , 2 Pass MDF board 3mm cut : 100mm/min , S1000 , 1 Pass MDF board 3mm cut : 320mm/min , S1000 , 2 Pass Black acrylic plate 3mm : 100mm/min , S1000 , 1Pass Black acrylic plate 5mm : 100mm/min , S1000 , 3Pass Laser Module： 80W Plywood 2mm cut : 500mm/min , S1000 , 1 Pass Plywood 3mm cut : 450mm/min , S1000 , 1 Pass Plywood 4mm cut : 400mm/min , S1000 , 1 Pass Plywood 5mm cut : 240mm/min , S1000 , 1 Pass Plywood 8mm cut : 120mm/min , S1000 , 1 Pass Plywood 10mm cut : 100mm/min , S1000 , 1 Pass MDF board 3mm cut : 180mm/min , S1000 , 1 Pass MDF board 3mm cut : 120mm/min , S1000 , 2 Pass Black acrylic plate 3mm : 120mm/min , S1000 , 1Pass Black acrylic plate 5mm : 120mm/min , S1000 , 2Pass Advantage： 1. Dual-LDswith Beam Compressed Technology A laser module has two built-in laser diodes, both withLD+FAC+C-Lenstechnology. The optical power of each diode with a built-in FAC lens is 5W With the beam combining technology, our laser modules have double the power, and the beam quality is as good as the individual diodes 2. Optical shield Optical housing, optical density in OD6+, using magnetic +Air Assist Nozzledesign, no need to wear additional glasses let you feel more involved in the creation, bring you more fun 3. Air assist system When performing laser cutting jobs, an air assist system blows air through the air nozzle, enhancing the cutting performance and reducing the burn marks. You can remove the air assist nozzle when you are doing non-cutter jobs.This laser kit only comes with an air assist nozzle, to make full use of the air assist feature, you may need to prepare an air assist pump and air tubing yourself. Recommended Air Tubing:inner diameterΦ2.5-3mm Recommended air pump:150kPa Install： Step 1. Confine the acrylic plate to the back of the laser module with screws, then confine the black adapter plate to the printer fan cover, then mount the laser inside the adapter plate with fastening screws. Step 2. Open the motherboard cover, locate the “BED” and “FAN+” ports and connect them with the red cable (skip this step for V4.2.7 motherboards). Step 3. Locate the blower port, slowly remove the blower terminal, replace the laser head power cable, and install the motherboard cover. Step 4. Connect the other end of the laser head power cable to the port marked “VCC, GND” on the laser head. Step 5. Adjust the height of the Z-axis (when the machine is off) to ensure that the distance between the laser head lens and the engraving object is 50 mm. Step 6. Turn on the machine and start engraving/cutting. Step 7. Wait for engraving to be completed. Tips -Please do not use without goggles. Never use around flammables and please be careful you dont destroy other things around it.
Explore More