Blue-M DCC-500/DCC8-5006 Pass-Through Class 10 Clean Room Oven 500°C 7.8 cu. ft.

Blue-M DCC-500/DCC8-5006 Ultra-Temp Class 10 Pass Through Clean Room Oven Comes with what you see in the pictures. If you don’t see it, you probably won’t get it. Specifications are from Blue-M and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This unit ships fully tested and guaranteed to work. I believe the 6 at the end of a DCC8-5006 is actually supposed to be a G which specifies the power requirements of the oven. The Unit’s Serial Number Tag Reads: Model Number: DCC8-5006 (I believe this 6 is supposed to be a G) Serial Number: DC-786 Temperature Range: 500°C/932°F Power Requirements: 480 V, 3-Phase, 60 Hz, 70 A Construction Features: Designed with construction features tailored to high temperature operation in Class 10 (M2.5) processing environments. Number Eight “Mirror” polished stainless steel exterior and interior – including heat shields for safety – minimize room convection currents All exterior panels fasten with low particle shedding ACME thread screws with Teflon inserts All bearing surfaces bushed with Teflon – to minimize particle generation Welded chamber housing – eliminates insulation leakage into facility Exterior painted surfaces coated with POLANE high gloss polyurethane paint – for easy cleaning and near zero particle generation Electronics enclosure meets NEMA 12 requirements – eliminates leaking of contaminated air into clean room Silicone free seals – Teflon inner chamber seals – Viton door seals – Water jacketed door seals to maintain seal integrity High Temperature Class 10 (M2.5) Clean Processing to Minimize Defects: Fully removable and cleanable inner chamber side walls and plenums Five sealed thermocouple ports, standard – for product monitoring Particle sampling port – to assure process control Exclusive Blue M high temperature recirculating air filtration system – laminar air flow for temperature control – easily removable Class 10 ULPA filter – All circulated air continuously filtered – no use of clean room air – sealed from environment eliminating the risk of facility contamination – ULPA filter is cooled for protection against particle shedding – filter overtemperature protection Removable stainless steel cooling coil and fittings Easily accessible heating element package Horizonta air flow – assures uniform thermal performance under all loading conditions Inconel sheathed heating elements – for low particle generation Magnehelic pressure gauge – to measure filter loading Chamber pressure gauge – assures positive chamber pressure Exclusive Blue M gas delivery system – gas introduced at the blower shaft insures proper mixing and eliminates the possibility of air being drawn into the chamber – electro polished stainless steel blower wheel to minimize contamination – purge and run flow meters for accurate and complete chamber inerting – suitable for inert gases and non-flammable forming gas (Max. 8% hydrogen) Direct drive blower – multi-blade centrifugal blower with matched helical scroll – high volume deliveyr – dynamically balanced for minimum noise and maximum reliability – lifetime lubricated motor Specifications: Temperature Range: 15°C above ambient to +500°C (+932°F) Uniformity: ±2% of setpoint Control Accuracy: ±0.5°C Resolution: ±0.1°C or ±1°F Interior Dimensions: 22.0″ W x 24.5″ D x 25.0″ H (59.9 cm x 62.2 cm x 63.5 cm) Interior Volume: 7.8 cubic feet (220.0 liter) Exterior Dimensions: 80.0″ W x 40.0″ D x 68.0″ H (203.0 cm x 101.0 cm x 172.0 cm) Machine Footprint: 22.2 square feet. (205.0 sq. m.) Electrical Requirements: 480 VAC, 3-Phase, 60 Hz, 70 A (per phase) Heater Capacity: 56 kW $250.00 minimum for packaging, handling, and order processing. Shipping to be determined by destination. Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user’s name. (3) What is the ultimate country destination? 12/30/21