Sterilizer temperature：121℃. Sterilization is working. Sterilizer temperature/pressure：121℃/0.12Mpa; 134℃/0.22Mpa. 22L Class B. 17L Class B. Physical Space: 17L. Tank capacity: 18L. 18L with Drying Function.
Explore MoreSterilizer temperature：121℃. Sterilizer temperature/pressure：121℃/0.12Mpa; 134℃/0.22Mpa. Adding about 800 ml of distilled water. Close the door cover, tight the rotate handle. Pressure Gauge in red area.
Explore MoreSterilizer temperature：121℃. Sterilizer temperature/pressure：121℃/0.12Mpa; 134℃/0.22Mpa. Adding about 800 ml of distilled water. Close the door cover, tight the rotate handle. Pressure Gauge in red area.
Explore MoreSterilizer temperature：121℃. Sterilizer temperature/pressure：121℃/0.12Mpa; 134℃/0.22Mpa. Easy to Maintain: The oil-free motor requires no lubrication, and the drainage bottle is easy to detach and disinfect.
Explore MoreSterilizer temperature：121℃. Sterilizer temperature/pressure：121℃/0.12Mpa; 134℃/0.22Mpa. Easy to Maintain: The oil-free motor requires no lubrication, and the drainage bottle is easy to detach and disinfect.
Explore MoreS&A CWFL series chiller is special for cooling Raycus, IPG, Max, nLIGHT, trumpf, Rofin and SPI fiber laser. Make sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant.
Explore MoreS&A CWFL series chiller is special for cooling Raycus, IPG, Max, nLIGHT, trumpf, Rofin and SPI fiber laser. Make sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant.
Explore MoreChiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector. The laser will stop working once it receives alarm signal from the water chiller for protection purpose.
Explore MoreMake sure the refrigerant is filled before running the chiller. If the compressor of this chiller has not been filled with refrigerant. Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Explore MoreChiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector. The laser will stop working once it receives alarm signal from the water chiller for protection purpose.
Explore MoreYour equipment saves lives. Partner with us — we deliver safely, on time, every time.
Timing: 11:00 AM to 11:59 PM
Copyrights © 2026 GLAVIK. All Rights Reserved.
Developed by Anifar Technologies