NEW Dental Composite Resin AR Heater Composed Material Heat Warmer 40℃-70℃±1℃

NEW Dental Composite Resin AR Heater Composed Material Heat Warmer 40℃-70℃±1℃ Description: 100% brand new and high quality! AR heater is designed for heating inlays and dental veneers to improve the flowability during bonding,preventing premature curing of the composite material and heating the resin, injection nozzle, anestheticetc.AR heater adopts the precision circuit to control its heating module, and keep the temperature within ±1°C .Depending on the material and personal choice, the temperature canset to: 40°C, 45°C and 50°C . Composition 1- Filter cover 2-Heating plate 3- Honeycomb heating barrel 4-Heating base 5-Indicator light 6-On/OFF 7-TEMP button 8-DC 9-Power adapter Operation 1. Place the heating base on a flat tabletop 2. Plug in the power adapter, then press the button“On/Off”to start heating. (Default 40°C after power on). 3.After power on, single click“On/Off”to select the required heating temperature (40°C, 45°C, 50°C). The corresponding temperature indicator flashes during heating. When the indicator turns from flashing to ever bright, it means that it already reaches the required temperature. After that, it goes into insulation. Pleaserefer to Form 1 for details: FORM 1 TenperatureI Indicator light color Heating Reach preset temperature 40°C White White LED flashing White LED is always on 45°C Green Green LED flashing Green LED is always on 50°C Blue Blue LED flashing Blue LED is always on NOTE 1.Heating base and heating plate cannot be used as non-stick hybrid mats. 2. Avoid scratching the heating base and the bottom of heating plate while using. 3.To avoid cross contamination, do not use again the used heating base and heating plate before disinfection. 4.The heating base and heating plate must be thoroughly cleaned if the composite materialis stuck on it. 5.Do not use the power adapter that exceeds the applicable voltage Cleaning and disinfection AlI parts can be wiped clean with a cloth that dampens with disinfectant. Do not immerse any parts in anyliquid for cleaning and disinfection. It can not be autoclave sterilization. Troubleshooting tips 3 indicators flash together Temperature control sensor failure Technical parameters Power adapter Input: 100-240V AC 50/60Hz Output: DC 12V 2A Power: 24W Temperature setting: 40±1°C , 45±1°C and50±1°C Filter range: (light 50 US Item arrived 80% 10% 8% 1% — ASIA Item arrived 30% 40% 20% 10% — EU Item arrived 20% 20% 50% 10% — AU Item arrived 30% 30% 20% 20% — Other Countries Item arrived 5% 10% 10% 60% — Returns If the item you received is damaged or defective,Please contact us immidately.We will free exchange or refund. We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges. You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts. Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding! Contact Us We will reply all messages within 24 business hours and we are able to give you a quick response during the duty time. If we are off duty, please kindly be patient and give us a little more time, not just leave the neutral or negative feedback without communication. Every problem will be solved ASAP if you contact us! Our working timeMonday To Friday:8:30 am — 12:00 am1:30 pm — 5:30 pm(Please Refer to Beijing Time.)